Lodar 2 Function Remote (Transmitter Only)

The Lodar SKU 92102-TX-8 (also formatted as 92102TX-8 or 92102TX) is a replacement 2-Function Standard Handheld Wireless Transmitter designed for Lodar 9 Series wireless control systems. It is widely used in commercial towing, winching, industrial hoists, and hydraulic recovery applications.

Lodar 9 Series 2-Function Standard Transmitter. Source: Lodar

Core Specifications & Technical Details

• System Compatibility: Fits Lodar 9 Series 2-function receiver systems (must match 9 Series receiver and function count).

• Control Functions: 2 directional/operational output functions (typically Winch In / Winch Out or Up / Down).

• Operating Range: Up to 200 ft (61 m) line-of-sight range.

• Power Source: 2× AAA standard alkaline batteries.

• Keypad & Design: Heavy-duty 12 mm dome switches with clear pockets for custom label insertions.

• RF Modulation & Frequency: 2-GFSK modulation across 433.050 MHz – 434.790 MHz (and North American variants) with fixed channel-hopping technology.

• Enclosure Rating: IP54 weather-resistant enclosure constructed from glass-reinforced nylon.

• Operating Temperature: 13°F to 104°F (-10°C to 40°C).

Key Operational Features & Button Layout

1. RESET Button (Green): Activates the transmitter and establishes connection to the receiver.

2. STOP Button (Red): Instantly shuts off signal transmission and puts the receiver on standby.

3. Function Buttons (F1 / F2): Two tactile dome buttons operating the primary output relays on the receiver.

4. Status LED Indicator:

   • Blinks: Active transmission.

   • Solid ON: Button depressed.

   • Pulses: Low battery alert.

Transmitter-to-Receiver Pairing Procedure

To pair/register a replacement 92102-TX-8 transmitter to an existing Lodar receiver:

1. Power on the receiver. Locate the Fault LED on the receiver PCB board.

2. When the Fault LED begins flashing, immediately PRESS and HOLD both the RESET and F1 buttons on the transmitter.

3. Hold both buttons continuously for a minimum of 5 seconds.

4. When registration succeeds, the Fault LED turns solid for 3 seconds.

5. Within those 3 seconds, release F1 first, then release RESET.

Package Contents & Accessories

• Included: 1× 92102TX-8 Transmitter, 1× Lanyard, 1× Instruction Manual.

• Optional Accessories: Clear protective rubber boots/covers, belt clips/holders, and locator tracking accessories.