12 Series LCG Subframe Components

View More Information

The Miller Industries Subframe Bearing Pad (0308928-96) is an OEM replacement component engineered for industrial tow trucks, rollbacks, and car carriers. Installed along the subframe assembly, this heavy-duty bearing pad provides a smooth, low-friction surface that facilitates fluid movement between the carrier deck and subframe while mitigating metal-on-metal wear and vibration.

Designed primarily for 2010 and newer Miller Industries 10 Series, 12 Series LCG (Low Center of Gravity), Vulcan, and Century car carriers, it helps preserve structural integrity and reduce routine maintenance costs.

Key Specifications

• Manufacturer: Miller Industries (Century / Vulcan)

• Part / SKU Number: 0308928-96

• Dimensions: 5/16" thick x 1-1/2" wide x 96" long

• Application: Subframe assembly on 10/12 Series rollback car carriers (Gen II, 2010+)

• Primary Function: Friction reduction, deck alignment, and wear prevention during loading/unloading operations.

- Century 10 Series Gen 2 (2010+)

- Century LCG12 Gen 2 (2010+)

- Chevron 10 Series Gen 2 (2010+)

- Chevron LCG12 Gen 2 (2010+)

- Vulcan 10 Series Gen 2 (2010+)

- Vulcan LCG12 Gen 2 (2009+)

View More Information

Pads are approximately 1.5" wide

Compatible with:

- Century 10 Series Gen 2 (2010+)

- Century LCG12 Gen 2 (2010+)

- Chevron 10 Series Gen 2 (2010+)

- Chevron LCG12 Gen 2 (2010+)

- Vulcan 10 Series Gen 2 (2010+)

- Vulcan LCG12 Gen 2 (2009+)

View More Information

View More Information

Ensure solid structural assembly and secure mounting with the Miller Self-Tapping Torx Screw (SKU: 04000321). Engineered for high-vibration commercial environments, this heavy-duty fastener cuts its own threads upon installation to create a tight, dependable connection without requiring pre-tapped holes.

Designed with a Torx drive profile, it maximizes torque transfer while minimizing cam-out, reducing tool wear and preventing fastener damage during installation or maintenance. Built to OEM specifications for Miller Industries towing and recovery equipment, this screw offers the durability, shear strength, and weather resistance required for long-term outdoor performance.

Key Features

• Self-Tapping Design: Cuts its own mating threads directly into pre-drilled material for a precise, vibration-resistant fit.

• Torx Drive Profile: Provides superior grip and high-torque delivery to prevent stripping during tightening.

• OEM Quality: Built to exact Miller Industries specifications for seamless replacement and reliable service.

• Corrosion Resistance: Designed to withstand tough weather, dirt, and road debris in heavy-duty recovery and towing applications.

Product Specifications

• Part Number / SKU: 04000321

• Thread Size: 5/16"-18

• Length: 1-1/4"

• Drive Type: Torx

• Fastener Type: Self-Tapping Screw

• Application: Towing, recovery bodies, wrecker body hardware, and industrial equipment mounting

View More Information

Protect your car carrier and trailing equipment from road debris, mud, and water spray with the genuine Miller Industries Aluminum Mudflap Splash Guard (Part # 0751024L). Engineered specifically for Miller, Century, and LCG car carrier subframes, this heavy-duty aluminum mounting bracket and splash guard delivers maximum corrosion resistance and long-lasting durability under severe towing conditions.

Key Features:

• OEM Genuine Quality: Direct replacement part manufactured by Miller Industries (Part # 0751024L).

• Durable Construction: Built from premium lightweight aluminum for exceptional strength and rust-proof performance.

• Position Alignment: Designed for Left Rear (LR) / Right Front (RF) configurations.

• Carrier Compatibility: Standard fitment for Miller, Century, and LCG 10/12 Series aluminum and steel car carriers.

• Protective Shield: Helps prevent spray, gravel, and road grime from damaging critical underbody components and towed vehicles.

View More Information

The Miller Industries Right-Hand Mud Flap Bracket (0751024R) is an OEM replacement mounting bracket engineered to secure splash guards and mud flaps on car carriers and rollback tow trucks. Built for heavy-duty commercial applications, it provides rigid structural support to ensure mud flaps stay properly aligned and positioned, protecting subframe components, hydraulics, and trailing vehicles from road debris, spray, and damage.

Key Features & Specifications

• Orientation: Right Hand (RH) / Right Rear

• Material: Heavy-duty steel construction built to withstand severe road vibration and environmental wear.

• Compatibility: Designed for Miller Industries carrier models, including:

  • Century: 10 Series Gen II, 12 Series LCG, 16 Series LCG, and 20 Series LCG carriers.

  • Chevron: 10 Series Gen II and LCG car carriers.

  • Vulcan: 10 Series Gen II and 16 Series LCG car carriers.

• Application: Secures standard 28" aluminum splash guards and rubber mud flap assemblies directly to subframe mounting points.

View More Information

Keep your vehicle’s wiring organized, secure, and protected from the elements with the Phoenix USA PH310 10-Pole Junction Box. Built for commercial trucks, trailers, towing setups, and heavy-duty equipment, this junction box simplifies complex multi-wire connections into a single, clean terminal point.

Designed with a heavy-duty, weather-resistant housing, the PH310 shields terminal connections against moisture, road dirt, corrosion, and continuous vibration. It makes troubleshooting, rewiring, and adding electrical accessories fast and straightforward.

Key Features

• 10-Pole Terminal Block: Provides 10 separate stud connections to easily organize lighting, brake circuits, auxiliary feeds, and grounds.

• Weather-Resistant Enclosure: Durable plastic cover seals out moisture, road spray, grime, and debris.

• Heavy-Duty Construction: Built to withstand harsh working environments, extreme temperatures, and heavy vehicle vibration.

• Easy Wire Management: Features side entry points for clean cable routing and effortless maintenance.

• Universal Application: Ideal for trailers, tow trucks, commercial rigs, service bodies, and agricultural machinery.

Technical Specifications

View More Information

Miller Industries OEM Bed Pivot Hinge Pin 1 1/2" Diameter x 41 3/8" Long | Part #0750952

Ensure heavy-duty strength and smooth deck tilt operation with the Genuine Miller Industries OEM Bed Pivot Hinge Pin (Part #0750952). Designed as an essential structural pivot component within the subframe assembly, this factory-grade replacement pin withstands intense shear stress, heavy carrier loads, and continuous daily operation on rollback car carriers.

Key Features & Benefits

• Direct OEM Fit: Manufactured to precise Miller Industries engineering standards to match factory hinge points and ensure smooth bed movement without excessive slope or binding.

• Heavy-Duty Construction: Built from solid, high-tensile steel designed to resist bending, corrosion, and wear under maximum towing deck payloads.

• Essential Maintenance Component: Serves as a direct replacement for worn or scored pivot pins, restoring alignment and reducing wear on surrounding subframe bushings and mounting brackets.

Key Applications & Compatibility

Used in the subframe assembly of Miller Industries car carriers:

• Compatible Brands: Century, Vulcan, and Chevron Car Carriers

• Equipment Fitment:

  • Century & Vulcan 12 Series: Steel & Aluminum Carriers (2009–Current)

  • Century & Vulcan 16 Series: Steel & Aluminum Carriers (2009–2014)

  • Century & Vulcan LCG Generation II 16 Series: Steel & Aluminum Carriers (2014–Current)

• Associated Parts: Commonly paired with subframe pivot bushings (Part #0750920)

Specifications

• Brand: Miller Industries

• Part Number: 0750952

• Product Type: Subframe Bed Pivot Hinge Pin

• Dimensions: 1 1/2" Diameter x 41 3/8" Long

• Condition: New OEM Replacement Part

View More Information

Miller Industries LCG G2 Taillight Housing Assembly (LH) | Part #0940325L

Keep your carrier fully compliant, visible, and job-ready with the Genuine Miller Industries Left-Hand Taillight Housing Assembly (Part #0940325L). Specifically engineered for Miller LCG™ (Low Center of Gravity) Generation 2 car carriers and rollbacks, this driver-side tail light housing provides robust protection for your tail light components against road debris, weather, and daily operational wear.

Key Features & Benefits

• Direct OEM Fitment: Precision-designed factory replacement for the driver side (LH) subframe/tail assembly on Miller LCG G2 carriers.

• Heavy-Duty Construction: Built to withstand harsh highway environments, weather exposure, high vibration, and heavy-duty towing operations.

• Seamless Installation: Factory mounting pattern and layout allow for a direct bolt-on swap without modifying existing mounting brackets or bodywork.

• Enhanced Safety & Compliance: Maintains proper light positioning and housing integrity to ensure full rear visibility on job sites and highways.

Specifications

• Brand: Miller Industries

• Part Number: 0940325L

• Product Type: Taillight Housing Assembly

• Position: Left Hand (Driver Side / LH)

• Compatibility: Miller LCG™ G2 Series Car Carriers & Rollbacks (Century, Vulcan, Chevron)

• Condition: New Genuine OEM Replacement Part

View More Information

Miller Industries Tail Light Housing Assembly, Right Hand (RH) | Part #0940325R

Restore complete rear lighting functionality and proper carrier subframe protection with the Genuine Miller Industries Tail Light Housing Assembly (Part #0940325R / 12-0940325R). Designed as a direct OEM factory replacement for the right-hand (passenger) side of Miller LCG (Low Center of Gravity) Generation II car carriers, this heavy-duty tail light box housing protects rear lighting components against road debris, impact, and subframe wear.

Key Features & Benefits

• Direct Genuine OEM Replacement: Machined and formed to precise Miller Industries factory specs for clean fitment onto subframe tail light mounting brackets.

• Gen II LCG Compatibility: Built specifically for Miller LCG Generation II Series car carriers (Century, Vulcan, etc.).

• Heavy-Duty Construction: Heavy-gauge metal housing built to withstand severe road vibration, harsh weather, and daily towing operations.

• Streamlined Maintenance: Allows straightforward bolt-on replacement of damaged or corroded rear passenger-side lighting enclosures.

Product Specifications

• Brand: Miller Industries

• Part Number: 0940325R

• Orientation: Right Hand (RH) / Passenger Side

• Application: Miller LCG Generation II Carrier Subframe Assemblies

• Product Type: Tail Light Housing / Box Assembly

• Condition: New Genuine OEM Replacement Part

View More Information

View More Information

View More Information

View More Information

View More Information

View More Information

View More Information

View More Information

Miller Industries Low Profile Stabilizer Extension Stand | Part #160525

Ensure maximum subframe stability and load support during car carrier operation with the genuine Miller Industries Low Profile Stabilizer Extension Stand. Designed for heavy-duty commercial carrier applications, this OEM support stand enhances rear deck stabilization during loading and unloading procedures, reducing frame stress and ensuring safe vehicle recovery.

Key Features & Benefits

• Genuine Miller OEM Quality: Precision-engineered to exact factory tolerances for seamless fitment and dependable performance under heavy working loads.

• Low-Profile Design: Engineered specifically for low-clearance subframe configurations, allowing smooth extension and retraction without ground interference.

• Enhanced Deck Stability: Provides vital structural support to the carrier subframe and rear stabilizer assembly, preventing unnecessary sway, tipping, or frame twist during loading.

• Durable Construction: Built from heavy-duty commercial-grade steel to withstand rigorous daily towing and extreme weather conditions.

Equipment Fitment & Compatibility

This extension stand is designed for direct replacement or upgrading subframe components on Miller car carriers:

• Century Car Carriers: 12 Series LCG (Low Center of Gravity) GEN II Carriers (2009–present)

• Vulcan Car Carriers: 12 Series LCG Platforms

• Subframe Assembly: Fits rear stabilizer and subframe leg extension housing.

Product Specifications

• Brand: Miller Industries

• Part Number: 160525

• Component Type: Rear Stabilizer Extension / Dock Stabilizer Support Stand

• Profile: Low Profile

• Material: Heavy-Duty Welded Steel

• Condition: New OEM Genuine Replacement Part

View More Information

View More Information

The Miller SKU 72A35120 is an OEM replacement Bed Extend Hydraulic Cylinder manufactured by Miller Industries for Century car carriers/rollbacks.

Key Specifications

• Dimensions: 3.5" Bore × 120" Stroke (3-1/2" x 120")

• Color/Finish: Factory Black

Equipment Compatibility

This cylinder drives the extension and retraction of the rollback bed on 10 Series, 12 Series, and 16 Series carriers:

• Century 12 Series LCG (Low Center of Gravity) Steel & Aluminum Carriers (2009–Current)

• Century 16 Series LCG Steel & Aluminum Carriers (2009–2014)

• Century 16 Series Gen II LCG Steel & Aluminum Carriers (2014–Current)

• Select Century 10-20 Series rollback bodies

Function & Related Hardware

This hydraulic cylinder pushes the carrier bed back out over the tail frame during deployment. When servicing or replacing this cylinder, associated replacement components typically include:

• Base End Pin: Miller Part # 729352 or0750524

• Rod End Pin: Miller Part # 72940 (0.980" x 6-5/8") or0750525

View More Information

Miller Industries Slideback Cylinder Body Mounting Pin | Part #32117

Ensure smooth slideback operation and reliable mounting deck stability on your car carrier with the Genuine Miller Industries Slideback Cylinder Body Pin (Part #32117). Designed as an OEM replacement pivot pin, this heavy-duty hardware component secures the slideback hydraulic cylinder to the deck/subframe mounting point on Miller car carriers.

Key Features & Benefits

• Direct OEM Fit: Precision-machined to exact factory specifications for perfect fitment, proper pivot alignment, and smooth hydraulic stroke action.

• Heavy-Duty Durability: Engineered from high-strength steel alloy to withstand severe shear stress, heavy deck loads, and repeated cycling in tough recovery conditions.

• Essential Equipment Hardware: Replacing worn, grooved, or bent cylinder mounting pins eliminates slope, reduces binding, and prevents excess wear on cylinder end bushings.

Specifications

• Brand: Miller Industries

• Part Number: 32117

• Product Type: Slideback Hydraulic Cylinder Body Mounting Pin

• Description: Pin - Slideback Cylinder Base / Body Mounting

• Condition: New Genuine OEM Replacement Part

View More Information

View More Information

Miller Industries LCG12 Slideback Cylinder Base Pin | Part #13302010

Keep your car carrier operating smoothly and securely with the Genuine Miller Industries Slideback Cylinder Base Pin (Part #13302010). Engineered as an exact OEM replacement hardware component, this heavy-duty pin secures the base end of the slideback hydraulic cylinder on Miller LCG12 series carrier decks.

Key Features & Benefits

• Direct LCG12 OEM Replacement: Precision-manufactured to factory specifications to fit Miller LCG (Low Center of Gravity) 12 series carriers, ensuring proper alignment and uninhibited pivot motion.

• Heavy-Duty Construction: Built from high-strength alloy steel to endure intense shear stress, constant cycling, and heavy deck loads encountered in daily towing and recovery operations.

• Eliminate Deck & Cylinder Play: Replaces slop-causing worn, grooved, or scored pivot pins, restoring tight tolerances, reducing hydraulic cylinder bushing wear, and ensuring smooth deck movement.

Specifications

• Brand: Miller Industries

• Part Number: 13302010

• Product Name: Pin - Slideback Cylinder Base (LCG12)

• Application: Miller LCG12 Car Carrier / Flatbed Assemblies

• Component Type: Hydraulic Cylinder Base Pivot Pin

• Condition: New Genuine OEM Replacement Part

View More Information

Miller Industries Slideback Cylinder Support Pad | Part #0751223

Protect your hydraulic cylinders and ensure smooth bed operation with the Genuine Miller Industries Slideback Cylinder Support Pad (Part #0751223). Engineered specifically for Miller Low Center of Gravity (LCG®) carriers, this durable replacement wear pad provides a clean, friction-reducing support surface for the slideback hydraulic cylinder during deck extension and retraction.

Key Features & Benefits

• Direct OEM Fit: Precision-molded to match exact factory dimensions for effortless installation and proper deck support.

• Durable Wear Protection: Formulated from high-density, low-friction composite material designed to withstand heavy wear, continuous sliding friction, and harsh road debris.

• System Maintenance: Prevents metal-on-metal contact, extending the life of your slideback cylinder barrel and deck subframe components.

Specifications

• Brand: Miller Industries

• Part Number: 0751223

• Product Type: Slideback Cylinder Support Wear Pad

• Compatible Series: Century & Vulcan LCG® 12, 16, and 20 Series Carriers (12 LCG, 16 LCG, 20 LCG)

• Condition: New Genuine OEM Replacement Part

View More Information

The Miller Industries Part #81286 is an OEM 3/8"-16 UNC U-Bolt designed for heavy-duty structural securing across various Miller Industries, Century, and Vulcan car carriers and slideback wreckers. Built to strict factory specifications, this heavy-duty hardware component provides maximum clamping strength, maintaining critical structural stability under heavy loads and rigorous daily towing operations.

Key Features

• OEM Precision Fit: Genuine replacement part designed specifically for Miller Industries carrier subframe and cylinder assembly mounting systems.

• Durable Construction: Manufactured from high-tensile steel to resist stretching, shearing, and severe vibration encountered during transport.

• Corrosion Resistant: Engineered for outdoor exposure to withstand moisture, road salts, and harsh atmospheric conditions.

• Standard Threading: Features clean 3/8"-16 UNC standard threads for secure, reliable torquing with standard locknuts and washers.

Applications & Compatibility

Compatible with various Miller Industries, Century, and Vulcan carrier models, including:

• Century & Vulcan LCG Series: 10 Series, 12 Series, 16 Series, and 20 Series Generation II Carriers

• Slideback cylinder support pads, stabilizer subframe mounts, and underbody fluid tube mounting assemblies

Product Specifications

• Part Number: 81286

• Manufacturer: Miller Industries

• Thread Size: 3/8"-16 UNC

• Component Type: Fastener / Mounting U-Bolt

View More Information

Steel 3/8" flat washer with Zinc plating

View More Information

View More Information

View More Information

View More Information

View More Information

View More Information

View More Information

View More Information