4000 lb Wheel Lift Gen 2 LCG

View More Information

View More Information

View More Information

View More Information

View More Information

Miller Extend Cylinder Pin, Base End (LCG20 / 4K) | Part #729352

Maintain precise wheel lift extension and smooth hydraulic operation on your car carrier with the Genuine Miller Industries Extend Cylinder Base End Pin (Part #729352). Designed as an OEM replacement pivot pin, this heavy-duty pin secures the extension cylinder at the base mount within 4K wheel lift assembly setups on Miller LCG (Low Center of Gravity) series carriers.

Key Features & Benefits

• Direct OEM Fit: Factory-machined to exact tolerances for seamless alignment and smooth pivot movement on LCG 20 / 4K wheel lift extend cylinder base mounts.

• Heavy-Duty Construction: Built from high-tensile steel to resist high shear stress, heavy towed load strain, and daily cycling under demanding recovery operations.

• Essential Maintenance Component: Replacing worn, grooved, or pitted pivot pins prevents slop, minimizes mechanical binding, and protects cylinder mounting bushings from excessive wear.

Specifications

• Brand: Miller Industries

• Part Number: 729352

• Product Type: Wheel Lift Extension Cylinder Pivot Pin (Base End)

• Compatibility: Miller LCG Series / 4K Wheel Lift Assemblies

• Condition: New Genuine OEM Replacement Part

View More Information

View More Information

View More Information

View More Information

View More Information

View More Information

View More Information

The Miller Nylatron Wear Pad (1/2" x 2" x 4" Drilled) (OEM Part #:63595H) is engineered for replacement and maintenance on Miller Industries towing equipment, including Century, Vulcan, and Chevron car carriers and rollbacks.

Key Features & Specifications

• Dimensions: 1/2" x 2" x 4"

• Material: Heavy-Duty Nylatron (Self-lubricating, wear-resistant nylon matrix)

• Design: Pre-drilled mounting holes for direct, fast bolt-on replacement

• OEM Compatibility: Fits Miller Industries equipment utilizing the standard 2" x 4" subframe and slide pad layout (Century Gen II Series, Chevron, and LCG subframe assemblies).

Product Overview

Designed to handle continuous friction and high impact, this genuine Nylatron wear pad acts as a protective, low-friction barrier between moving steel assemblies on your carrier or wrecker subframe. Replacing worn slide pads with OEM-spec components prevents metal-on-metal scraping, reduces hydraulic cylinder drag, and extends the service life of your carrier deck and subframe rails.

Benefits:

• High Durability: Resist mechanical wear, oil, grease, and road debris better than standard plastic pads.

• Low Friction: Self-lubricating properties ensure smooth, quiet extension and retraction under heavy loads.

• Direct Fit: Pre-drilled design matches factory mounting locations—no custom cutting or extra drilling required.

View More Information

The Miller Nylatron Wear Pad (OEM Part #: 63595) is engineered for replacement and maintenance on Miller Industries towing equipment, including Century, Vulcan, and Chevron car carriers and rollbacks.

Key Features & Specifications

• Dimensions: 1/2" x 2" x 4"

• Material: Heavy-Duty Nylatron (Self-lubricating, wear-resistant nylon matrix)

• Design: Flat Non-drilled

• OEM Compatibility: Fits Miller Industries equipment utilizing the standard 2" X 4" and slide pad layout (Century Gen II Series, Chevron, and LCG subframe assemblies).

Product Overview

Designed to handle continuous friction and high impact, this genuine Nylatron wear pad acts as a protective, low-friction barrier between moving steel assemblies on your carrier or wrecker subframe. Replacing worn slide pads with OEM-spec components prevents metal-on-metal scraping, reduces hydraulic cylinder drag, and extends the service life of your carrier deck and subframe rails.

Benefits:

• High Durability: Resist mechanical wear, oil, grease, and road debris better than standard plastic pads.

• Low Friction: Self-lubricating properties ensure smooth, quiet extension and retraction under heavy loads.

View More Information

View More Information

Miller Industries Extend Cylinder Rod End Pin | Part #72940

Maintain smooth extension and reliable power transmission on your car carrier underlift or bed extend system with the Genuine Miller Industries Extend Cylinder Rod End Pin (Part #72940). Engineered specifically for heavy-duty towing applications, this precision pin connects the rod end of the hydraulic extension cylinder to the wheel lift or bed boom assembly.

Key Features & Benefits

• OEM Precision Fit: Manufactured to exact factory specifications (0.970" / 0.980" x 6-5/8") to ensure smooth pivot action, proper stroke alignment, and minimal slope.

• High-Strength Steel Construction: Engineered to handle high shear loads, harsh road vibration, and continuous extension cycles without bending or binding.

• Essential Maintenance Component: Replacing worn, grooved, or pitted cylinder pins protects cylinder rod ends, bushings, and boom weldments from uneven wear and stress.

Specifications

• Brand: Miller Industries (Century, Vulcan, Chevron)

• Part Number: 72940

• Product Type: Extension Cylinder Rod End Pin

• Dimensions: 0.970" / 0.980" Diameter x 6-5/8" Length

• Condition: New Genuine OEM Replacement Part

View More Information

View More Information

Miller Industries 4K Wheel Lift Crossbar Pivot Pin Assembly | Part #0940433

Restore smooth crossbar rotation and eliminate underlift play on your car carrier wheel lift with the Genuine Miller Industries Crossbar Pivot Pin Assembly (Part #0940433). Engineered specifically for 4K Gen 2 wheel lift systems, this heavy-duty pivot pin provides smooth articulation and dependable stability under heavy tow loads.

Key Features & Benefits

• Genuine OEM Fit: Precision-manufactured to factory standards for exact fitment on Miller Industries 4,000 lbs. (4K) rating wheel lift crossbar assemblies.

• Heavy-Duty Construction: Built from high-strength alloy steel designed to withstand extreme shear stress, road vibration, and daily tow strain.

• Smooth Articulation: Keeps the crossbar swiveling smoothly, reducing friction and preventing hazardous binding or slop during loading and transit.

• Preventative Maintenance: Direct bolt-in replacement for grooved, bent, or heavily worn pivot pins to protect surrounding crossbar bushings and detent components from premature failure.

Product Specifications

• Brand: Miller Industries

• Part Number: 0940433

• Product Name: Crossbar Pivot Pin Assembly 4K

• Application: 4K Wheel Lift Crossbar Assemblies on Century, Vulcan, and Miller Car Carriers

• Condition: New Genuine OEM Part

View More Information

Miller Industries Pivot Pin Retaining Washer | Part #0720463

Keep wheel lifts, booms, and pivot assemblies secure with the Genuine Miller Industries Pivot Pin Retaining Washer (Part #0720463). Designed as a heavy-duty flat washer, this OEM hardware component secures pivot pins and retaining bolts across Century, Vulcan, Chevron, and AutoGrip towing and recovery systems.

Key Features & Benefits

• Direct OEM Specification: Manufactured to precise dimensions (1" Outer Diameter x 3/8" Inner Diameter) to fit standard Miller pivot pin retaining hardware seamlessly.

• Heavy-Duty Construction: Built to withstand severe shear loads, vibration, and continuous pivot movement on active car carriers and wreckers.

• Versatile Application: Used across multiple Miller Industries lines—including AutoGrip II wheel lifts, Century Series carriers, and Vulcan equipment—to lock down pivot pins and prevent lateral play.

Specifications

• Brand: Miller Industries

• Part Number: 0720463

• Product Type: Pivot Pin Retaining Flat Washer

• Dimensions: 1" O.D. x 3/8" I.D.

• Condition: New Genuine OEM Replacement Part

View More Information

View More Information

View More Information

Miller Industries Crossbar Detent Spacer | Part #07003396

Ensure precise alignment and smooth wheel lift operation with the Genuine Miller Industries Crossbar Detent Spacer (Part #07003396). Designed as an OEM replacement component, this high-durability spacer maintains proper spacing and smooth engagement for the crossbar detent mechanism across Miller Industries tow trucks and car carriers.

Key Features & Benefits

• Direct OEM Fit: Manufactured to exact factory tolerances for seamless replacement on Miller wheel lifts and wrecker assemblies.

• Heavy-Duty Construction: Built to withstand constant cycling, vibration, and heavy loads encountered in demanding towing and recovery environments.

• Smooth Detent Function: Helps prevent excessive wear, slop, and binding in the crossbar pivot and detent lock mechanism.

Specifications

• Brand: Miller Industries

• Part Number: 07003396

• Product Type: Wheel Lift / Crossbar Detent Spacer

• Description: Spacer - Crossbar Detent

• Condition: New Genuine OEM Replacement Part

View More Information

View More Information

View More Information