3,000 LB Underlifts Gen 2

View More Information

View More Information

Miller Extend Cylinder Pin, Base End (LCG20 / 4K) | Part #729352

Maintain precise wheel lift extension and smooth hydraulic operation on your car carrier with the Genuine Miller Industries Extend Cylinder Base End Pin (Part #729352). Designed as an OEM replacement pivot pin, this heavy-duty pin secures the extension cylinder at the base mount within 4K wheel lift assembly setups on Miller LCG (Low Center of Gravity) series carriers.

Key Features & Benefits

• Direct OEM Fit: Factory-machined to exact tolerances for seamless alignment and smooth pivot movement on LCG 20 / 4K wheel lift extend cylinder base mounts.

• Heavy-Duty Construction: Built from high-tensile steel to resist high shear stress, heavy towed load strain, and daily cycling under demanding recovery operations.

• Essential Maintenance Component: Replacing worn, grooved, or pitted pivot pins prevents slop, minimizes mechanical binding, and protects cylinder mounting bushings from excessive wear.

Specifications

• Brand: Miller Industries

• Part Number: 729352

• Product Type: Wheel Lift Extension Cylinder Pivot Pin (Base End)

• Compatibility: Miller LCG Series / 4K Wheel Lift Assemblies

• Condition: New Genuine OEM Replacement Part

View More Information

View More Information

Miller Industries Hydraulic Tilt / Wheel Lift Cylinder | Part #0308372-1175

Restore full hydraulic power and smooth operating control to your car carrier or wrecker with the Genuine Miller Industries Hydraulic Cylinder (Part #0308372-1175). Engineered to exact factory standards, this heavy-duty dual-acting hydraulic cylinder delivers reliable lifting, tilting, and extension capability under high loads and demanding field conditions.

Key Features & Benefits

• OEM Quality & Precision: Direct factory replacement ensuring exact geometry, pin-to-pin alignment, and hydraulic fitting placement for a seamless install.

• Heavy-Duty Construction: Built with high-strength steel tubing, precision-ground chrome plating on the rod, and premium hydraulic seal packages to resist wear, corrosion, and high-pressure fluid leaks.

• Smooth Load Handling: Engineered for consistent power delivery during tilt, up/down lift, and dock stabilizer functions.

Key Applications & Compatibility

Used across multiple Miller Industries brands for wheel lift tilt, up/down boom, and dock stabilizer assemblies:

• Primary Application: Wheel Lift Tilt Cylinder / Dock Stabilizer Hydraulic Cylinder

• Compatible Brands & Equipment:

  • Century: Series 10 Gen II Car Carriers

  • Vulcan: Series 10 Gen II Aluminum & Steel Car Carriers

  • Chevron: Series 10 Gen II Carriers

  • Challenger, Champion, & Holmes: Select light-duty carriers and wreckers

Specifications

• Brand: Miller Industries

• Part Number: 0308372-1175

• Cylinder Bore & Stroke: 4" x 11.75"

• Product Type: Hydraulic Tilt / Wheel Lift Cylinder

• Condition: New OEM Replacement Part

View More Information

View More Information

Miller Industries Pivot Pin | Part #84680

Keep your wheel lift operating smoothly and eliminate excess play with the Genuine Miller Industries Pivot Pin (Part #84680). Designed specifically for heavy-duty towing applications, this OEM replacement pin connects critical moving components in your wrecker's wheel lift assembly, ensuring tight tolerances, proper weight distribution, and safe towing performance under load.

Key Features & Benefits

• Direct OEM Replacement: Manufactured to precise factory dimensions for a exact fit, eliminating slop and preventing uneven wear on surrounding bushings.

• Heavy-Duty Construction: Built from high-tensile strength steel to handle high vertical loads, road impact, and continuous stress during towing.

• Corrosion Protection: Treated with a durable protective finish to resist rust, moisture, and road grime, extending service life in severe environments.

• Simple Installation: Designed for direct drop-in replacement during routine wheel lift maintenance or rebuilds.

Compatibility

This pivot pin is a direct-fit component for a wide range of Miller Industries towing equipment, including:

• Century & Vulcan Car Carriers equipped with standard or L-arm wheel lift assemblies.

• Century, Vulcan, & Challenger Wreckers utilizing factory Miller wheel lift mechanism pivot joints.

Specifications

• Brand: Miller Industries

• Part Number: 84680

• Product Type: Wheel Lift Pivot Pin

• Material: Heavy-Duty Alloy Steel

• Condition: Brand New OEM Part

View More Information

View More Information

View More Information

View More Information

View More Information

View More Information

View More Information

The Miller Nylatron Wear Pad (1/2" x 2" x 4" Drilled) (OEM Part #:63595H) is engineered for replacement and maintenance on Miller Industries towing equipment, including Century, Vulcan, and Chevron car carriers and rollbacks.

Key Features & Specifications

• Dimensions: 1/2" x 2" x 4"

• Material: Heavy-Duty Nylatron (Self-lubricating, wear-resistant nylon matrix)

• Design: Pre-drilled mounting holes for direct, fast bolt-on replacement

• OEM Compatibility: Fits Miller Industries equipment utilizing the standard 2" x 4" subframe and slide pad layout (Century Gen II Series, Chevron, and LCG subframe assemblies).

Product Overview

Designed to handle continuous friction and high impact, this genuine Nylatron wear pad acts as a protective, low-friction barrier between moving steel assemblies on your carrier or wrecker subframe. Replacing worn slide pads with OEM-spec components prevents metal-on-metal scraping, reduces hydraulic cylinder drag, and extends the service life of your carrier deck and subframe rails.

Benefits:

• High Durability: Resist mechanical wear, oil, grease, and road debris better than standard plastic pads.

• Low Friction: Self-lubricating properties ensure smooth, quiet extension and retraction under heavy loads.

• Direct Fit: Pre-drilled design matches factory mounting locations—no custom cutting or extra drilling required.

View More Information

The Miller Nylatron Wear Pad (OEM Part #: 63595) is engineered for replacement and maintenance on Miller Industries towing equipment, including Century, Vulcan, and Chevron car carriers and rollbacks.

Key Features & Specifications

• Dimensions: 1/2" x 2" x 4"

• Material: Heavy-Duty Nylatron (Self-lubricating, wear-resistant nylon matrix)

• Design: Flat Non-drilled

• OEM Compatibility: Fits Miller Industries equipment utilizing the standard 2" X 4" and slide pad layout (Century Gen II Series, Chevron, and LCG subframe assemblies).

Product Overview

Designed to handle continuous friction and high impact, this genuine Nylatron wear pad acts as a protective, low-friction barrier between moving steel assemblies on your carrier or wrecker subframe. Replacing worn slide pads with OEM-spec components prevents metal-on-metal scraping, reduces hydraulic cylinder drag, and extends the service life of your carrier deck and subframe rails.

Benefits:

• High Durability: Resist mechanical wear, oil, grease, and road debris better than standard plastic pads.

• Low Friction: Self-lubricating properties ensure smooth, quiet extension and retraction under heavy loads.

View More Information

View More Information

View More Information

View More Information

View More Information

View More Information

View More Information

View More Information

View More Information

View More Information

Miller Industries Extend Cylinder Rod End Pin | Part #72940

Maintain smooth extension and reliable power transmission on your car carrier underlift or bed extend system with the Genuine Miller Industries Extend Cylinder Rod End Pin (Part #72940). Engineered specifically for heavy-duty towing applications, this precision pin connects the rod end of the hydraulic extension cylinder to the wheel lift or bed boom assembly.

Key Features & Benefits

• OEM Precision Fit: Manufactured to exact factory specifications (0.970" / 0.980" x 6-5/8") to ensure smooth pivot action, proper stroke alignment, and minimal slope.

• High-Strength Steel Construction: Engineered to handle high shear loads, harsh road vibration, and continuous extension cycles without bending or binding.

• Essential Maintenance Component: Replacing worn, grooved, or pitted cylinder pins protects cylinder rod ends, bushings, and boom weldments from uneven wear and stress.

Specifications

• Brand: Miller Industries (Century, Vulcan, Chevron)

• Part Number: 72940

• Product Type: Extension Cylinder Rod End Pin

• Dimensions: 0.970" / 0.980" Diameter x 6-5/8" Length

• Condition: New Genuine OEM Replacement Part

View More Information