Miller Industries SKU 0200018 is the genuine single-piece 3" Short Axle Fork Adapter designed for heavy-duty wrecker and towing underlifts.

Product Overview

Manufactured using a single-piece cast alloy steel process, this fork adapter offers significantly higher yield strength (nearly 2X stronger) while being approximately 30% lighter than older legacy fork designs. It is specifically built to safely engage and lift medium- and heavy-duty vehicles by the leaf spring, axle housing, or frame rail.

Specifications & Dimensions

• Throat / Opening Width: 3.0 inches

• Shaft Diameter: 2.0 inches (standard size for heavy wrecker crossbars)

• Seat Width: 2.5 inches

• Inside Height / Lift Clearance: 2.75 to 3.5 inches of clearance between crossbar holder and cutout bottom

• Total Height: 8.75 inches

• Material: Heat-treated cast alloy steel

Key Features & Operational Uses

• Low-Profile Engagement: The "Short" profile minimizes clearance issues when sliding under tight suspensions or lower frame setups without contacting body panels.

• Universal Compatibility: Works across all Miller Industries heavy-duty underlifts (Century, Vulcan, Challenger, and Holmes wreckers) equipped with standard 2" receiver crossbars.

• Reduced Operator Fatigue: The single-piece casting reduces dead weight while maintaining maximum structural integrity under heavy tongue loads.

View More Information

Miller Industries 5" Short Axle Tow Fork | Part #0200019W

Upgrade your heavy-duty recovery setup with high-strength, lightweight cast alloy technology. The Genuine Miller Industries 5" Short Axle Fork (Part #0200019W) is engineered specifically for picking up vehicles from the leaf spring, axle, or frame.

Manufactured as a single-piece cast alloy steel unit, this design delivers nearly double the yield strength while being roughly 30% lighter than legacy welded fork styles.

Key Features & Benefits

• Cast Alloy Steel Construction: One-piece cast design eliminates weld stress points, offering maximum yield strength and long-term durability under extreme loads.

• Wide 5" Opening: Provides ample clearance for larger axle sizes, frame rails, and heavy-duty leaf springs.

• Standard 2" Shaft: Features a precise 2" diameter shank designed for seamless compatibility with standard 2" axle fork receivers and crossbar adapters.

• 3" Low-Profile Clearance: 3" distance from the fork holder to the bottom cutout ensures a secure fit in tight frame and suspension spaces.

• Reduced Weight: Advanced metallurgy provides heavy-duty lifting capacity with lower physical strain during setup and stowing.

Key Applications & Equipment Compatibility

Compatible with Miller Industries heavy-duty wrecker and rotator fork receivers utilizing 2" shafts, including:

• Century: Heavy-Duty Wreckers, Rotators, and 10S/Underlift Crossbars

• Vulcan: Heavy-Duty & Integrated Recovery Units

• Challenger & Holmes: Selected heavy-duty recovery underlift systems

Specifications

• Brand: Miller Industries

• Part Number: 0200019W

• Opening Width: 5 inches

• Shaft Diameter: 2 inches

• Clearance: 3 inches (from holder to bottom cutout)

• Material: Cast Alloy Steel

• Selling Unit: Sold Individually (Single)

View More Information

Miller Medium Axle Fork – 3" Wide Opening | Part #0200020

Gain reliable, heavy-duty towing attachment points with the Genuine Miller Industries Medium Axle Tow Fork (Part #0200020). Designed for commercial towing and recovery applications, this cast steel fork fits securely into standard 2" crossbar receivers to elevate and secure vehicles by the axle, frame, or spring during transport.

Key Features & Benefits

• 3" Wide Opening: Sized for medium-duty axle clearance, providing a clean fit on light-to-medium trucks, vans, and commercial chassis.

• Standard 2" Shaft: Features a standard 2" mounting shaft for seamless compatibility with Miller Industries crossbars and receiver tubes.

• 4-1/2" Height Lift: Raises the vehicle’s lifting point 4.5 inches above the crossbar to deliver improved ground clearance and undercarriage protection during towing.

• Heavy-Duty Construction: Built from high-strength cast steel to handle rigorous recovery loads without bending or distorting under pressure.

Specifications

• Brand: Miller Industries

• Part Number: 0200020

• Fork Size: Medium (3" Mouth Opening)

• Shaft Size: 2" Standard Square Shaft

• Lift Height: 4-1/2" Rise

• Quantity: Sold Individually (Single)

View More Information

Miller Medium Axle Frame Fork (5" Wide Opening) | Part #0200021W

Perform secure, heavy-duty under-reach towing and frame lifting with the Genuine Miller Industries Medium Axle Fork (Part #0200021W). Precision-cast for maximum strength and reduced operational weight, this 5-inch frame fork gives recovery operators the clearance and durability needed to lift vehicles directly by the axle, leaf springs, or frame rails.

Key Features & Benefits

• Cast Steel Alloy Construction: Manufactured from high-strength cast alloy steel to deliver up to double the yield strength of traditional welded forks while remaining up to 30% lighter for easier manual handling.

• 5-Inch Wide Opening: Designed with a 5-inch throat to fit securely over standard vehicle axles, springs, and frame crossmembers.

• Optimal Clearance: Provides 6-1/4 inches of height clearance between the fork receiver/holder and the bottom of the fork cutout, giving extra working space during under-reach hookups.

• Industry Standard 2" Shaft: Built with a standard 2-inch diameter mounting shaft for broad compatibility across heavy-duty wreckers and recovery under-reach units.

Applications & Compatibility

Ideal for medium and heavy-duty towing, recovery, and vehicle transport operations.

• Compatible Equipment: Works with Century, Vulcan, Chevron, and Miller Industries heavy wrecker under-reach systems equipped with standard 2" fork receivers.

• Hookup Points: Leaf springs, front/rear axles, or vehicle frame rails.

Specifications

• Brand: Miller Industries

• Part Number: 0200021W

• Fork Opening Width: 5"

• Shaft Diameter: 2"

• Clearance: 6-1/4" (from holder to cutout bottom)

• Material: One-Piece Cast Steel Alloy

• Quantity: Sold Individually (Single Fork)

View More Information

Miller Industries 3" Tall Axle Fork | Part #0200022

Maximize under-reach capability and ground clearance during heavy recovery operations with the Genuine Miller Industries 3" Tall Axle Fork (Part #0200022). Built from high-strength cast steel alloy, this heavy-duty fork provides robust lifting support directly under axle shafts, frame rails, or leaf springs, giving you the critical clearance needed to capture low-slung commercial chassis without damaging air lines, oil pans, or bumpers.

Key Features & Benefits

• High-Strength Cast Steel Construction: Cast alloy steel design offers maximum yield strength while reducing overall weight for easier handling and deck loading.

• 3" Wide Mouth Clearance: Designed with a 3" wide throat opening to securely cradle axles, frame rails, and leaf spring perches without slippage.

• Standard 2" Mounting Shaft: Features a standard 2" diameter shaft compatible with all standard Miller Industries, Century, Vulcan, and Chevron crossbar fork receivers.

• Added Lifting Elevation: Provides extra height clearance above the crossbar to handle low-clearance vehicles safely.

Specifications

• Brand: Miller Industries

• Part Number: 0200022

• Throat Opening: 3.0"

• Shaft Diameter: 2.0" Standard Shaft

• Weight: Approx. 18 lbs

• Unit: Sold Individually

View More Information

Miller Industries 6" Short Offset Rear Axle Fork Set | Part #0200024

Maximize underlift clearance and tow safely with the Genuine Miller Industries 6" Short Offset Rear Axle Fork. Engineered specifically for heavy-duty wrecker and rotator underlift systems, this offset fork provides the critical clearance needed when rigging around low-hanging bumpers, crossmembers, and tight rear axle components.

Cast using high-strength alloy steel, this specialized axle fork delivers up to 2x higher yield strength while remaining nearly 30% lighter than legacy cast fork designs. It gives operators a dependable, low-profile attachment point on frame rails, axles, or leaf springs without adding unnecessary payload weight.

Key Features & Benefits

• Short Offset Geometry: Provides essential offset clearance to prevent contact with air lines, oil pans, body work, or low frame structures.

• Advanced Cast Steel Construction: Provides exceptional durability and high yield strength in a lightweight, ergonomic design for easier everyday handling on the job site.

• Universal Underlift Compatibility: Fits standard 2" square receiver bar openings across Miller Industries heavy-duty underlifts.

• Versatile Lifting Surface: Ideal for engaging rear axles, leaf springs, frame rails, or specialized suspension points safely and securely.

Technical Specifications

• Brand: Miller Industries

• Part Number: 0200024

• Alternate SKU: Pair 124001387

• Opening Size: 6 inches

• Style: Short Offset Rear Axle Fork

• Shaft Diameter: Fits standard 2" x 2" underlift crossbar fork receivers

• Material: High-Strength Cast Alloy Steel

• Weight: Approx. 12 lbs per fork

View More Information

View More Information

View More Information

View More Information

The Miller Industries 0310230 is a heavy-duty, zinc-plated 5/8" x 6" clevis pin engineered for towing and recovery equipment. It provides a secure, pivoting connection point within hydraulic attachments, lift adapter assemblies, and underlift systems across various Miller Industries wrecker lines.

Key Features & Specifications

• Dimensions: 5/8" Diameter x 6" Length

• Finish: Zinc-plated steel for corrosion resistance and durability in harsh outdoor environments

• Retention Method: Uses a standard hairpin / hitch pin clip (e.g., hairpin #0400886) through the pre-drilled pin hole

• Direct Replaces / Cross-Reference: Replaces Miller part number #0711002

Common Applications & Equipment Fitment

Used across multiple Miller Industries towing units (Century and Vulcan brands):

• Lift Adapter Assemblies: Vulcan NV-50 Wrecker, Century 7035 2-Speed Wrecker

• Heavy Wrecker & Underlift Assemblies: Century 1150 (Knee Boom & Roller XLT travel cylinder hydraulics)

View More Information

View More Information

The Miller Industries Part No. 0801186 is a Right-Hand (RH / RT) Chain Hook Adapter manufactured for heavy-duty towing, recovery, and underlift equipment.

Product Overview

• Part Number: 0801186 (Pair #124001420)

• Part Name: Chain Hook Adapter, Right-Hand (RH / Right Side)

• Manufacturer: Miller Industries (Century / Challenger / Vulcan)

• Application: Underlift and heavy-duty recovery boom attachments used to secure chains and attachment hardware during vehicle towing operations.

Key Features & Functionality

• Underlift Attachment: Designed to mount into the underlift receiver/fork adapter grid to anchor safety or hookup chains securely.

• Heavy-Duty Construction: Built from high-strength forged or structural steel to withstand heavy line-pull and lifting capacities in commercial towing applications.

Common Equipment Compatibility

This adapter is utilized across various Miller Industries heavy-duty and medium-duty wrecker systems, including:

• Century Wreckers: Century 1150 Knee Boom, Century 9055, and related heavy recovery units.

• Challenger Series: Challenger CH-31, CH-32, CH-45, and SDU-2 series (6807 / 8807 / 9907).

View More Information

View More Information

View More Information

View More Information

This self-aligning fork from Miller Industries attaches to the spring itself.

The fork hinging action assures alignment while lifting. This part can be used to replace Part Numbers: 12-0801090 and 124001721

View More Information

Miller Industries Crossbar Retaining Pin Assembly (SKU: 0900900)

Keep your wheel lift and underlift equipment operating smoothly and securely with the genuine replacement Miller Industries Crossbar Pin Assembly. Engineered for heavy-duty commercial towing applications, this pin provides essential stability and precise alignment for crossbar assemblies across Century, Vulcan, and Magna-Tech systems.

Key Features & Specifications:

• Manufacturer Part Number: 0900900

• Dimensions: 5/8" X 9"

• Product Weight: 1.0 lb

• Heavy-Duty Construction: Built from high-tensile steel to resist wear, shear stress, and harsh outdoor road environments.

• Direct OEM Fit: Designed for exact fitment on crossbar and underlift setups to eliminate excessive play and ensure safe vehicle transport.

Applications & Equipment Compatibility:

Fits a wide range of Miller Industries commercial underlift and wheel-lift systems, including:

• Century: Heavy Duty Underlift (HDU), Heavy Duty Underlift Retrofit (HDUR), Super Duty Underlift, and Century 5030 series

• Vulcan: V-60 and V-70 Lift Adapter Series

View More Information

View More Information

Miller Industries Heavy Duty Pintle Hook Adapter Kit | Part #124002211

Expand your heavy-duty recovery and towing capabilities with the Genuine Miller Industries Pintle Hook Adapter Kit (Part #124002211). Built specifically for Miller heavy-duty wreckers and rotators, this heavy-duty steel adapter mounts directly into cast steel fork receivers to handle pintle-hitch trailers, equipment, and specialized transport loads with maximum stability and strength.

Designed as the foundational base attachment for Miller’s heavy-duty trailer towing setup, this kit also serves as the required mounting platform for 5th wheel, kingpin, and tow ball attachments.

Key Features & Benefits

• OEM Precision Engineering: Genuine Miller Industries factory replacement accessory ensures exact fitment, maximum load security, and full compliance with heavy-duty towing ratings.

• Versatile Heavy-Duty Towing: Converts crossbar fork receivers into a rugged pintle hook receiver hitch to tow equipment trailers, pintle-eye rigs, and commercial trailers.

• Foundation for Multi-Attachment Kits: Serves as the required base receiver bracket for installing Miller's 5th Wheel Adapter Plate, Male King Pin Attachment, and Trailer Ball Adapter.

• Rugged Construction: Built from high-strength steel to withstand severe torque, heavy tongue weights, and harsh roadside conditions.

Key Applications & Compatibility

Designed for heavy-duty wrecker crossbars with cast fork receivers:

• Compatible Equipment:

  • Fits Miller Heavy Duty Wreckers & Rotators (Century, Vulcan, and Challenger models rated 4024 / 24-ton and larger).

  • Note: Not intended for light-duty units or smaller wreckers such as Century 2465, 3212, or Vulcan V30 and below.

• Required Companion Base For:

  • Miller 5th Wheel Adapter Plate (Part #124001833)

  • Miller Male King Pin Attachment Kit (Part #124001948)

  • Miller Trailer Ball Adapter Kit (Part #124002431)

Specifications

• Brand: Miller Industries

• Part Number: 124002211

• Product Type: Pintle Hook Adapter Kit / Receiver Attachment

• Leg Spacing: 18.5" (Center-of-shaft leg to center-of-shaft leg)

• Condition: New OEM Replacement Part

View More Information

View More Information

Miller Industries OEM Retainer Pin Assembly (Part #0902378)

Product Overview

Ensure secure and reliable operation of your wrecker's wheel lift system with the genuine Miller Industries Retainer Pin Assembly (Part #0902378). Designed to exact factory specifications, this retainer pin assembly is engineered to securely hold fork adapters, king pin adapters, and towing attachments onto the wheel-lift crossbar.

Key Features & Benefits

• Genuine OEM Part: Manufactured by Miller Industries to guarantee proper fit, structural integrity, and long-lasting durability in demanding tow environments.

• Secure Fit: Keeps fork adapters and attachments firmly locked in place on the wheel-lift crossbar during towing operations.

• Heavy-Duty Construction: Built from high-strength steel to withstand high stress, heavy loads, and daily wear and tear.

Specifications

• Part Number: 0902378 

• Description: Retainer Pin Assembly

• Dimensions: Approx. 5" L x 6.5" W x 0.62" H

• Outside Diameter: 0.62"

Applications & Compatibility

This retainer pin assembly is utilized across a wide variety of Miller Industries light-duty, medium-duty, and heavy-duty towing equipment, including (but not limited to):

• Century: 3212, 3224, 4024, LDU Lowrider, and select 40 LCG / underlift systems

• Challenger: CH-45 (King Pin Adapter assembly)

• Compatible with various standard fork adapters, pintle adapters, and wheel-lift crossbars.

View More Information